manualshive.com logo in svg

Hyundai LX2, Owner'S Manual

The Motorola LX2 is a high-performance device that offers advanced features and functionality. To make the most of this product, ensure you have the comprehensive User Manual at your disposal. Download the manual for free from manualshive.com and unlock the full potential of your Motorola LX2.

Share
Download
background image

3-178

Convenience features

Floor mat anchor(s) 
(if equipped)

ALWAYS use the Floor Mat Anchors
to attach the floor mats to the vehi-
cle. The anchors on the front floor
carpet keep the floor mats from slid-
ing forward.

The following must be observed
when installing ANY floor mat
to the vehicle.

•

Ensure that the floor mats are
securely attached to the vehi-
cle's floor mat anchor(s) before
driving the vehicle.

•

Do not use ANY floor mat that
cannot be firmly attached to
the vehicle's floor mat anchors.

•

Do not stack floor mats on top
of one another (e.g. all-weath-
er rubber mat on top of a car-
peted floor mat). Only a single
floor mat should be installed
in each position.

IMPORTANT - Your vehicle was
manufactured with driver's side
floor mat anchors that are
designed to securely hold the
floor mat in place. To avoid any
interference with pedal operation,
HYUNDAI recommends that the
HYUNDAI floor mat designed for
use in your vehicle be installed.

WARNING  

Do not hang other objects such
as hangers or hard objects
except clothes. Also, do not put
heavy,

sharp or breakable

objects in the clothes pockets.
In an accident or when the cur-
tain air bag is inflated, it may
cause vehicle damage or per-
sonal injury.

WARNING  

OTM048096

Summary of Contents for LX2






















































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for LX2

iDataLink Maestro Installation Manual preview
Maestro
Brand: iDataLink Pages: 9
Fass Titanium Series Installation Manual preview
Titanium Series
Brand: Fass Pages: 13
GMC YUKON 2018 Owner'S Manual preview
YUKON 2018
Brand: GMC Pages: 425
Brodit ProClip 804438 Installation Instructions preview
ProClip 804438
Brand: Brodit Pages: 2
Ford Focus ST 2018 Supplement Manual preview
Focus ST 2018
Brand: Ford Pages: 38
Chevrolet 2014 TRAX Owner'S Manual preview
2014 TRAX
Brand: Chevrolet Pages: 412
Mercedes-Benz 2015 SLK Operator'S Manual preview
2015 SLK
Brand: Mercedes-Benz Pages: 358
Meta System 900000358 Installation Technical Sheet preview
900000358
Brand: Meta System Pages: 22
LXE Akerstroms Tx700 Configuration Manual preview
Akerstroms Tx700
Brand: LXE Pages: 146
Air Lift 88365 Installation Manual preview
88365
Brand: Air Lift Pages: 28
Dolphin DAS400 Owner'S Manual preview
DAS400
Brand: Dolphin Pages: 16
Mazda 0000-8L-G03A Installation Instructions preview
0000-8L-G03A
Brand: Mazda Pages: 3
TOGU Airgo Active cushion / Comfort Manual And Maintenance Instructions preview
Airgo Active cushion / Comfort
Brand: TOGU Pages: 2
Green Valley 601951 Instructions Manual preview
601951
Brand: Green Valley Pages: 17
Buick 2014 LaCrosse Manual preview
2014 LaCrosse
Brand: Buick Pages: 112
Ultraplast MD19 User Manual preview
MD19
Brand: Ultraplast Pages: 5
Genesis GV60 2022 Quick Reference Manual preview
GV60 2022
Brand: Genesis Pages: 29
Porsche 1972 911 Workshop Manual preview
1972 911
Brand: Porsche Pages: 1005

Brands by name

Popular brands

Load more brands