manualshive.com logo in svg

Hyundai LX2, Owner'S Manual

The Motorola LX2 is a high-performance device that offers advanced features and functionality. To make the most of this product, ensure you have the comprehensive User Manual at your disposal. Download the manual for free from manualshive.com and unlock the full potential of your Motorola LX2.

Share
Download
background image

5-34

Driving your vehicle

To release : 

• If you depress the accelerator

pedal with  the shift button in D
(Drive) or R (Reverse) or Manual
shift mode, the Auto Hold will be
released automatically and the
vehicle will start to move. The indi-
cator changes from green to white.

• If the vehicle is restarted using the

cruise control toggle switch (RES+
or SET-) (if equipped) while Auto
Hold and cruise control is operat-
ing, the Auto Hold will be released
regardless of accelerator pedal
operation. The AUTO HOLD indi-
cator changes from green to white.

To cancel :

1. Depress the brake pedal.
2. Press the [AUTO HOLD] switch.
The AUTO HOLD indicator will turn
off.

When the AUTO HOLD is auto-
matically released by depress-
ing the accelerator pedal, always
take a look around your vehicle.
Slowly depress the accelerator
pedal for a smooth start.

WARNING  

OLX2058015

L

L

i

i

g

g

h

h

t

t

 

 

o

o

f

f

f

f

To prevent, unexpected and sud-
den vehicle movement, ALWAYS
press your foot on the brake
pedal to cancel the Auto Hold
before you:
- Drive downhill.
- Drive the vehicle in R (Reverse).
- Park the vehicle.

WARNING  

Summary of Contents for LX2






















































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for LX2

Metra Electronics 99-3010S Installation Instructions Manual preview
99-3010S
Brand: Metra Electronics Pages: 14
Garmin BC 30 Owner'S Manual preview
BC 30
Brand: Garmin Pages: 2
UltraGauge EM Installation & Operation Manual preview
EM
Brand: UltraGauge Pages: 55
Metra Electronics 99-3103 Installation Instructions preview
99-3103
Brand: Metra Electronics Pages: 2
Toyota 1973 Crown Hardtop Owner'S Manual preview
1973 Crown Hardtop
Brand: Toyota Pages: 50
Dometic Heki 2 Installation And Operating Manual preview
Heki 2
Brand: Dometic Pages: 158
Ford 2005 P207 Explorer Sport Trac Owner'S Manual preview
2005 P207 Explorer Sport Trac
Brand: Ford Pages: 540
SilverLeaf Electronics VMS 645 CL Owner'S Manual preview
VMS 645 CL
Brand: SilverLeaf Electronics Pages: 16
r.LiNK RL2-MMI3G-GW Manual preview
RL2-MMI3G-GW
Brand: r.LiNK Pages: 21
Skoda KAROQ 2017 Owner'S Manual preview
KAROQ 2017
Brand: Skoda Pages: 324
Mercedes-Benz 2007 SLR Mclaren Operator'S Manual preview
2007 SLR Mclaren
Brand: Mercedes-Benz Pages: 425
Vauxhall 2013 Ampera Infotainment Manual preview
2013 Ampera
Brand: Vauxhall Pages: 95
Westfalia 17 56 46 Instruction Manual preview
17 56 46
Brand: Westfalia Pages: 2
BabySafe Beagle User Manual preview
Beagle
Brand: BabySafe Pages: 43
E-Lead EL-HA1 Manual preview
EL-HA1
Brand: E-Lead Pages: 11
Lincoln 2012 MKX Owner'S Manual preview
2012 MKX
Brand: Lincoln Pages: 364
iDataLink BLADE-AL-HK4-EN Install Manual preview
BLADE-AL-HK4-EN
Brand: iDataLink Pages: 35
JAC HFC7151M1V-U221B Workshop Manual preview
HFC7151M1V-U221B
Brand: JAC Pages: 106

Brands by name

Popular brands

Load more brands