manualshive.com logo in svg

Hyundai LX2, Owner'S Manual

The Motorola LX2 is a high-performance device that offers advanced features and functionality. To make the most of this product, ensure you have the comprehensive User Manual at your disposal. Download the manual for free from manualshive.com and unlock the full potential of your Motorola LX2.

Share
Download
background image

5-154

Driving your vehicle

Warning message

Smart Cruise Control disabled.
Radar blocked

When the sensor lens cover is
blocked with dirt, snow, or debris, the
Smart Cruise Control system opera-
tion may stop temporarily. If this
occurs, a warning message will
appear on the LCD display. Remove
any dirt, snow, or debris and clean
the radar sensor lens cover before
operating the Smart Cruise Control
system.

The Smart Cruise Control system
may not properly activate, if the radar
is totally contaminated, or if any sub-
stance is not detected after turning
ON the engine (e.g. in an open ter-
rain).

Information

For the SCC operation is temporarily
stopped if the radar is blocked, but you
wish to use cruise control mode (speed
control function), you must convert to
the cruise control mode (refer to "To
convert to Cruise Control mode" in
the following page.  

i

•

Use only a soft cloth to wash
the vehicle. Do not spray pres-
surized water directly on the
sensor or sensor cover.

•

Be careful not to apply unnec-
essary force on the radar sen-
sor or sensor cover. If the sen-
sor is forcibly moved out of
proper alignment, the Smart
Cruise Control system may
not operate correctly. In this
case, a warning message may
not be displayed. We recom-
mend that you have the vehi-
cle inspected by an author-
ized HYUNDAI dealer.

•

If the front bumper becomes
damaged in the area around
the radar sensor, the Smart
Cruise Control system may
not operate properly. We rec-
ommend that you have the
vehicle inspected by an
authorized HYUNDAI dealer.

•

Use only genuine parts or the
equivalent specified for your
vehicle to repair or replace a
damaged sensor or sensor
cover. Do not apply paint to
the sensor cover.

•

Do not apply license plate
frame or foreign objects such
as a bumper sticker or a
bumper guard near the radar
sensor.

Doing so may

adversely affect the sensing
performance of the radar.

•

Always keep the radar sensor
and lens cover clean and free
of dirt and debris.

CAUTION

OTM058061L

Summary of Contents for LX2






















































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for LX2

Safe Fleet PRIME DESIGN VRI3-E-PM11 Manual preview
PRIME DESIGN VRI3-E-PM11
Brand: Safe Fleet Pages: 12
Jeep Cherokee 16 1982 Technical & Service Manual preview
Cherokee 16 1982
Brand: Jeep Pages: 1311
Paxton Automotive Novi Owner'S Installation Manual preview
Novi
Brand: Paxton Automotive Pages: 85
Thule 1489 Instructions Manual preview
1489
Brand: Thule Pages: 8
CITROEN C8 NaviDrive Manual preview
C8 NaviDrive
Brand: CITROEN Pages: 52
Alfa Romeo FIX&GO automatic Manual preview
FIX&GO automatic
Brand: Alfa Romeo Pages: 40
Safe Fleet PRIME DESIGN VRR-NV200 Manual preview
PRIME DESIGN VRR-NV200
Brand: Safe Fleet Pages: 12
Oldsmobile 2003 Alero Owner'S Manual preview
2003 Alero
Brand: Oldsmobile Pages: 354
Mercedes-Benz A 150 Owner'S Manual preview
A 150
Brand: Mercedes-Benz Pages: 305
Volvo S90 TWIN ENGINE Owner'S Manual preview
S90 TWIN ENGINE
Brand: Volvo Pages: 662
Bulldog Security BulldogOne BD1 User Manual preview
BulldogOne BD1
Brand: Bulldog Security Pages: 7
Painless Performance VORTEC 60211 Installation Instructions Manual preview
VORTEC 60211
Brand: Painless Performance Pages: 16
EUFAB 11439 Assembly preview
11439
Brand: EUFAB Pages: 8
SAAS MUSCLE Series Quick Start Manual preview
MUSCLE Series
Brand: SAAS Pages: 3
Nuna Pipa TW 2 Manual preview
Pipa TW 2
Brand: Nuna Pages: 29
Wabtec R-290 Service Manual preview
R-290
Brand: Wabtec Pages: 216
Lincoln MKZ HYBRID 2016 Quick Reference Manual preview
MKZ HYBRID 2016
Brand: Lincoln Pages: 10
SEC 6/911 Mounting Instructions preview
6/911
Brand: SEC Pages: 2

Brands by name

Popular brands

Load more brands