Hyundai LX2 Owner'S Manual Download Page 326

Page: 326 / 597

5-49

Dri
ving y

ur v

ehicle

• Do not drive in water if the level

is higher than the bottom of the
vehicle.

• Check your brake condition

once you are out of mud or
water. Depress the brake pedal
several times as you move slow-
ly until you feel normal braking
return.

• Shorten your scheduled mainte-

nance interval if you drive in off-
road conditions such as sand,
mud or water (see "Maintenance
Under Severe Usage Conditions"
in chapter 7).

• Always wash your vehicle thor-

oughly after off road use, espe-
cially the bottom of the vehicle.

• Be sure to equip the vehicle with

four tires of the same size and
type.

• Make sure that a full time 4WD

vehicle is towed by a flat bed
tow truck.

NOTICE

To reduce the risk of SERIOUS
INJURY or DEATH:

•

Do not drive in conditions that
exceed the vehicles intended
design such as challenging
off-road conditions.

•

Avoid high speeds when cor-
nering or turning.

•

Do not make quick steering
wheel movements, such as
sharp lane changes or fast,
sharp turns.

•

The risk of a rollover is great-
ly increased if you lose con-
trol of your vehicle at highway
speeds.

•

Loss of control often occurs if
two or more wheels drop off
the roadway and the driver
over steers to reenter the
roadway.

•

In the event your vehicle
leaves the roadway, do not
steer sharply. Instead, slow
down before pulling back into
the travel lanes.

WARNING

Summary of Contents for LX2






















































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for LX2

Reviews:

Related manuals for LX2

Brands by name

Popular brands

Hyundai LX2, Owner'S Manual

Search results

Summary of Contents for LX2

Reviews:

Related manuals for LX2

Brands by name

Popular brands