manualshive.com logo in svg

Hyundai LX2, Owner'S Manual

The Motorola LX2 is a high-performance device that offers advanced features and functionality. To make the most of this product, ensure you have the comprehensive User Manual at your disposal. Download the manual for free from manualshive.com and unlock the full potential of your Motorola LX2.

Share
Download
background image

5-100

Warning message

Blind-Spot Collision Warning
(BCW) system disabled. 
Radar blocked

This warning message may appear
when :
- One or both of the sensors on the

rear bumper is blocked by dirt or
snow or a foreign object.

- Driving in rural areas where the

sensor does not detect another
vehicle for an extended period of
time.

- When there is inclement weather

such as heavy snow or rain.

If any of these conditions occur, the
light on the BCW/BCA switch and the
system will turn off automatically.
When the BCW canceled warning
message is displayed in the cluster,
check to make sure that the rear
bumper is free from any dirt or snow
in the areas where the sensor is
located. Remove any dirt, snow, or
foreign material that could interfere
with the radar sensors.
After any dirt or debris is removed,
the system should operate normally
after about 10 minutes of driving the
vehicle.
If the system still does not operate
normally, we recommend that you
have your vehicle inspected by an
authorized HYUNDAI dealer.

Information 

Turn off the BCW, BCA and RCCW
system (if equipped) when a trailer or
carrier is installed.

- Press the BCW/BCA button (the

indicator on the button will turn off)

- Deactivate the RCCW system by

deselecting 

'User Settings 

→

Driver assistance

→

Parking safety 

→

Rear Cross

Traffic Safety' (if equipped)

i

Driving your vehicle

OIK057092L

Summary of Contents for LX2






















































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for LX2

A-Tach Mounts ST-1 Instructions preview
ST-1
Brand: A-Tach Mounts Pages: 2
A-Tach Mounts 50291 Quick Start Manual preview
50291
Brand: A-Tach Mounts Pages: 2
A-Tach Mounts 50206 Instructions preview
50206
Brand: A-Tach Mounts Pages: 2
AA Products KX405 Instruction Manual preview
KX405
Brand: AA Products Pages: 8
Feniex AM600 Instruction Manual preview
AM600
Brand: Feniex Pages: 6
Subaru 2016 Outback Owner'S Manual preview
2016 Outback
Brand: Subaru Pages: 99
EUFAB 11556 Operating Instructions Manual preview
11556
Brand: EUFAB Pages: 52
Navman T1 F20 User Manual preview
T1 F20
Brand: Navman Pages: 10
Macrom EF-AR1-5561 Manual preview
EF-AR1-5561
Brand: Macrom Pages: 10
ADS FlashLogic FLC-FORS-FO1B-FLRSFO1-EN Install Manual preview
FlashLogic FLC-FORS-FO1B-FLRSFO1-EN
Brand: ADS Pages: 25
Hyundai 2001 Elantra Owner'S Manual preview
2001 Elantra
Brand: Hyundai Pages: 168
Kuda 293950 Installation Instruction preview
293950
Brand: Kuda Pages: 3
Audi 2001 A3 Quick Reference Manual preview
2001 A3
Brand: Audi Pages: 4
Thule Brink 5324 Fitting Instructions Manual preview
Brink 5324
Brand: Thule Pages: 15
Kargo Master 40983 Quick Start Manual preview
40983
Brand: Kargo Master Pages: 18
Spracht Aura Mobile BT MCP-2014 Quick Start Manual preview
Aura Mobile BT MCP-2014
Brand: Spracht Pages: 2
Safe Fleet HD3S Quick Installation Manual preview
HD3S
Brand: Safe Fleet Pages: 2
Lincoln MKZ HYBRID 2016 Quick Reference Manual preview
MKZ HYBRID 2016
Brand: Lincoln Pages: 10

Brands by name

Popular brands

Load more brands