manualshive.com logo in svg

Hyundai i40 2015, Owner'S Manual

Share
Download
Hyundai i40 2015 Owner'S Manual Download Page 571

7 47

Maintenance

3. Check the removed fuse; replace it if it

is blown. To remove or insert the fuse,
use the fuse puller in the engine com-
partment fuse panel.

4. Push in a new fuse of the same rating,

and make sure it fits tightly in the clips.
If it fits loosely, we recommend that
you consult an authorised HYUNDAI
repairer.

Main fuse

If the main fuse is blown, it must be
removed as follows:
1. Turn off the engine.
2. Disconnect the negative battery cable.
3. Remove the nuts shown in the picture

above.

4. Replace the fuse with a new one of the

same rating.

5. Reinstall in the reverse order of

removal.

Multi fuse

If the multi fuse is blown, it must be
removed as follows:
1. Turn off the engine.
2. Disconnect the negative battery cable.
3. Remove the fuse panel on the right

side in the engine compartment.

4. Remove the nuts shown in the picture

above.

5. Replace the fuse with a new one of the

same rating.

6. Reinstall in the reverse order of

removal.

✽

NOTICE

If the multi fuse or main fuse is blown,
we recommend that you consult an
authorised HYUNDAI repairer.

OVF071024R

OLM079025

CAUTION

After checking the fuse box in the
engine compartment,

securely

install the fuse box cover. If not,
electrical failures may occur from
water leaking in.

Summary of Contents for i40 2015

















































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands