Hyundai i40 2015, Owner'S Manual

Page: 214 / 624

Features of your vehicle
128 4
When HBA is not working properly, the
warning message will come on for a few
second. After the message disappears,
the master warning light will illuminate.
We recommend that the system be
checked by a HYUNDAI authorised
repairer. Turn signals and lane change sig-
nals
The ignition switch must be on for the
turn signals to function. To turn on the
turn signals, move the lever up or down
(A). Green arrow indicators on the instru-
ment panel indicate which turn signal is
operating. They will self-cancel after a
turn is completed. If the indicator contin-
ues to flash after a turn, manually return
the lever to the OFF position.
To signal a lane change, move the turn
signal lever slightly and hold it in position
(B). The lever will return to the OFF posi-
tion when released.
If an indicator stays on and does not
flash or if it flashes abnormally, one of the
turn signal bulbs may be burned out and
will require replacement.
OVF041127
WARNING
• Do not place any accessories,
stickers or tint the windscreen.
• Have the windscreen glass
replaced from an authorised deal-
er.
• Do not remove or impact related
parts of the Smart High Beam
system.
• Be careful that water doesn’t get
into the Smart High Beam unit.
• Do not place objects on the dash-
board that reflects light such as
mirrors, white paper, etc. The sys-
tem may malfunction if sunlight is
reflected.
• At times, the Smart High Beam
system may not work properly,
always check the road conditions
for your safety. When the system
does not operate normally, manu-
ally change between the high
beam and low beam.
OVF045412/OVF045416
■
Type A ■
Type B