Hyundai i40 2015 Owner'S Manual Download Page 26

Page: 26 / 624

3 5

Safety system of your vehicle

Seatback angle

To recline the seatback:
1. Lean forward slightly and lift up on the

seatback recline lever.

2. Carefully lean back on the seat and

adjust the seatback of the seat to the
position you desire.

3. Release the lever and make sure the

seatback is locked in place. (The lever
MUST return to its original position for
the seatback to lock.)

Seat cushion height (if equipped)

To change the height of the seat cushion,
push the lever upwards or downwards.
• To lower the seat cushion, push down

the lever several times.

• To raise the seat cushion, pull up the

lever several times.

Lumbar support (if equipped)

The lumbar support can be adjusted by
pressing the lumbar support switch on
the side of the seat.
1. Press the front portion of the switch to

increase support, or the rear portion of
the switch, to decrease support.

2. Release the switch once it reaches the

desired position.

OVF031003/H

OVF031004/H

OVF033077/H

Summary of Contents for i40 2015

















































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for i40 2015

Reviews:

Brands by name

Popular brands

Hyundai i40 2015, Owner'S Manual

Search results

Summary of Contents for i40 2015

Reviews:

Brands by name

Popular brands