Hyundai i40 2015, Owner'S Manual

Page: 36 / 624

3 15
Safety system of your vehicle
Removal and installation
To remove the head restraint, raise it as
far as it can go then press the release
button (1) whilst pulling the head restraint
up (2).
To reinstall the head restraint, put the
head restraint poles (3) into the holes
whilst pressing the release button (1).
Then adjust it to the appropriate height.
Armrest
To use the armrest, pull it forward from
the seatback.
Seat warmer (if equipped)
The seat warmer is provided to warm the
rear seats during cold weather. With the
ignition switch in the ON position, push
either of the switches to warm rear seats.
During mild weather or under conditions
where the operation of the seat warmer
is not needed, keep the switches in the
"OFF" position.
• Each time you press the button, the
temperature setting of the seat will
change as follows :
• The seat warmer defaults to the OFF
position whenever the ignition switch is
turned on.
OVF031020
OFF
→
HIGH( )
→
LOW( )
→
OVF031019 OVF031018
WARNING
Make sure the head restraint locks
in position after adjusting it to
properly protect the occupants.