manualshive.com logo in svg

Hyundai i40 2015, Owner'S Manual

Share
Download
Hyundai i40 2015 Owner'S Manual Download Page 524

CAUTION - 

Automatic

transaxle/Dual clutch trans-
mission

• If the car is being towed with all

four wheels on the ground, it can
be towed only from the front. Be
sure that the transaxle is in neu-
tral. Be sure the steering is
unlocked by placing the ignition
switch in the ACC position. A
driver must be in the towed vehi-
cle to operate the steering and
brakes.

• To avoid serious damage to the

automatic transaxle/dual clutch
transmission, limit the vehicle
speed to 10 mph (15 km/h) and
drive less than 1 mile (1.5 km)
when towing.

• Before towing, check the auto-

matic transaxle fluid leak under
your vehicle. If the automatic
transaxle/dual clutch transmis-
sion fluid is leaking, a flatbed
equipment or towing dolly must
be used.

6 34

What to do in an emergency

Summary of Contents for i40 2015

















































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands