manualshive.com logo in svg

Hyundai i40 2015, Owner'S Manual

Share
Download
Hyundai i40 2015 Owner'S Manual Download Page 446

Driving your vehicle

60

5

Hill-start assist control (HAC) 

A vehicle has the tendency to slip back
on a steep hill when it starts to go after
stopping. The Hill-start Assist Control
(HAC) prevents the vehicle from slipping
back by operating the brakes automati-
cally for about 2 seconds. The brakes are
released when the accelerator pedal is
depressed or after about 2 seconds.

✽

NOTICE

• The HAC does not operate when the

transaxle shift lever is in the P (Park)
or N (Neutral) position.

• The HAC activates even though the

ESC is off but it does not activate
when the ESC has malfunctioned. 

Emergency Stop Signal (ESS) 
(if equipped)

The Emergency Stop Signal system
alerts the driver behind by blinking the
stop light when the vehicle is braked rap-
idly and severely.
The system is activated when:
• The vehicle suddenly stops (vehicle

speed is over 35 mph (55 km/h) and
the vehicle deceleration at greater than
7 m/s

2

)

• The ABS is activating
When the vehicle speed is under 25 mph
(40 km/h) and the ABS deactivates or the
sudden stop situation is over, the stop
light will not blink. Instead, the hazard
warning flasher will turn on automatically.
The hazard warning flasher will turn off
when vehicle speed is over 10km/h after
the vehicle has stopped. Also, it will turn
off when the vehicle is driven at low
speed for some time. You can turn it off
manually by pushing the hazard warning
flasher switch.

Good braking practices

WARNING

• Whenever you leave or park your

vehicle, always set the parking
brake as far as possible and fully
engage the vehicle's transaxle
into the P (Park) position. If the
parking brake is not fully
engaged, the vehicle may move
inadvertently and injure yourself
and others.

• All vehicles should always have

the parking brake fully engaged
when parking to avoid inadver-
tent movement of the vehicle
which can injure occupants or
pedestrians.

WARNING

The HAC is activated only for about
2 seconds, so when the vehicle is
starting off always depress the
accelerator pedal.

CAUTION

The Emergency Stop Signal (ESS)
system will not work if the hazard
warning flasher is already on.

Summary of Contents for i40 2015

















































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands