manualshive.com logo in svg

Hyundai i40 2015, Owner'S Manual

Share
Download
Hyundai i40 2015 Owner'S Manual Download Page 432

Driving your vehicle

46

5

To release EPB (electric parking brake)
automatically:

• Shift lever in P (Park)

With the engine running depress the
brake pedal and shift out of P (Park) to
R (Rear) or D (Drive).

• Shift lever in N (Neutral)

With the engine running depress the
brake pedal and shift out of N (Neutral)
to R (Rear) or D (Drive).

• Manual transaxle vehicle

1. Start the engine.
2. Fasten the driver's seat belt.
3. Close the driver's door, engine bon-

net and tailgate/trunk.

4. Depress the clutch pedal with the

gear engaged.

5. Depress the accelerator pedal whilst

releasing the clutch pedal.

• Automatic transaxle vehicle

1. Start the engine.
2. Fasten the driver's seat belt.
3. Close the driver's door, engine bon-

net and tailgate/trunk.

4. Depress the accelerator pedal whilst

the shift lever is in R (Rear), D
(Drive) or Sports mode.

Make sure the brake warning light goes
off.

✽

NOTICE

• For your safety, you can engage the

EPB even though the ignition switch or
engine stop/start button is in the OFF
position, but you cannot release it. 

• For your safety, depress the brake

pedal and release the parking brake
manually with the EPB switch when
you drive downhill or when backing up
the vehicle.

✽

NOTICE -

Manual transaxle

A vehicle towing a trailer on a hill or on
an incline may slightly roll backwards
when starting the vehicle. To prevent the
situation follow the below instructions.
1. Depress the clutch pedal and select a

gear.

2. Keep pulling up the EPB switch.
3. Depress the accelerator pedal and

slowly release the clutch pedal. 

4. If the vehicle starts off with enough

driving power release the EPB switch. 

Do not follow the above procedure when
driving on a flat level ground. The vehi-
cle may suddenly move forward.

CAUTION

• If the parking brake warning light

is still on even though the EPB
has been released, we recom-
mend that the system be checked
by an authorised HYUNDAI
repairer.

• Do not drive your vehicle with the

EPB applied. It may cause exces-
sive brake pad and brake rotor
wear.

Summary of Contents for i40 2015

















































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands