manualshive.com logo in svg

Hyundai i40 2015, Owner'S Manual

Share
Download
Hyundai i40 2015 Owner'S Manual Download Page 187

4 101

Features of your vehicle

✽

NOTICE

• If you travel approximately 30 ~ 60

miles after the engine warms up, after
adding the engine oil, the warning
light will go off.

• Cycle the ignition from OFF to ON 3

times within 10 seconds, the warning
light will go off immediately. However,
when you turn off the warning light
without adding the engine oil, the light
will come on again after travelling
approximately 30 ~ 60 miles after the
engine warms up.

Malfunction indicator lamp
(MIL) (check engine light) 

This indicator light is part of the Engine
Control System which monitors various
emission control system components. If
this light illuminates whilst driving, it indi-
cates that a potential problem has been
detected somewhere in the emission
control system.
This light will also illuminate when the
ignition switch is turned to the ON posi-
tion, and will go out in a few seconds
after the engine is started. If it illuminates
whilst driving, or does not illuminate
when the ignition switch is turned to the
ON position, we recommend that the
system be checked by an authorised
HYUNDAI repairer.
Generally, your vehicle will continue to be
drivable, we recommend that the system
be checked by an authorised HYUNDAI
repairer promptly.

CAUTION

If the light comes on continuously
after adding the engine oil and trav-
eling approximately 30 ~ 60 miles
after the engine warms up, we rec-
ommend that the system be
checked by an authorised HYUNDAI
repairer.
Even if this light doesn't come on
after the engine has started, the
engine oil should be checked and
supplied periodically.

CAUTION

Prolonged driving with the
Emission Control System
Malfunction Indicator Light illumi-
nated may cause damage to the
emission control systems which
could effect drivability and/or fuel
economy.

CAUTION - 

Petrol engine

If the Emission Control System
Malfunction Indicator Light illumi-
nates, potential catalytic converter
damage is possible which could
result in loss of engine power.
We recommend that the Engine
Control System be inspected by an
authorised HYUNDAI repairer as
soon as possible.

Summary of Contents for i40 2015

















































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands