manualshive.com logo in svg

Hyundai i40 2015, Owner'S Manual

Share
Download
Hyundai i40 2015 Owner'S Manual Download Page 134

Features of your vehicle

48

4

Opening the bonnet 

1. Pull the release lever to unlatch the

bonnet. The bonnet should pop open
slightly.

2. Go to the front of the vehicle, raise the

bonnet slightly, push up the secondary
latch (1) inside of the bonnet centre
and lift the bonnet (2).

3. Raise the bonnet. It will raise com-

pletely by itself after it has been raised
halfway.

Closing the bonnet

1. Before closing the bonnet, check the

following:

• All filler caps in engine compartment

must be correctly installed.

• Gloves, rags or any other com-

bustible material must be removed
from the engine compartment.

2. Lower the bonnet halfway and push it

down. Make sure the bonnet is locked
securely.

BONNET 

OVF041023R

WARNING

Open the bonnet after turning off
the engine on a flat surface, shift-
ing the shift lever to the P(Park)
position for automatic transaxle/
dual clutch transmission and to the
1(First) gear or R(Reverse) for man-
ual transaxle, and setting the park-
ing brake.

OVF045024K

Summary of Contents for i40 2015

















































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands