manualshive.com logo in svg

Hyundai i40 2015, Owner'S Manual

Share
Download
Hyundai i40 2015 Owner'S Manual Download Page 558

Maintenance

34

7

Checking tyre inflation pressure

Check your tyres once a month or
more.
Also, check the tyre pressure of the
spare tyre.

How to check

Use a good quality gauge to check
tyre pressure. You can not tell if your
tyres are properly inflated simply by
looking at them. Radial tyres may
look properly inflated even when
they're underinflated.
Check the tyre's inflation pressure
when the tyres are cold. - "Cold"
means your vehicle has been sitting
for at least three hours or driven no
more than 1 mile (1.6 km).

WARNING - Tyre inflation

Over inflation or under inflation
can reduce tyre life, adversely
affect vehicle handling, and
lead to sudden tyre failure. This
could result in loss of vehicle
control and potential injury.

CAUTION - Tyre pressure

Always observe the following:
• Check tyre pressure when the

tyres are cold. (After vehicle
has been parked for at least
three hours or hasn't been
driven more than 1.6 km (1
mile) since startup.)

• Check the pressure of your

spare tyre each time you
check the pressure of other
tyres.

• Never overload your vehicle.

Be careful not to overload a
vehicle luggage rack if your
vehicle is equipped with one.

• Worn, old tyres can cause

accidents. If your tread is
badly worn, or if your tyres
have been damaged, replace
them.

CAUTION

• Warm tyres normally exceed

recommended cold tyre pres-
sures by 28 to 41 kPa (4 to 6
psi). Do not release air from
warm tyres to adjust the pres-
sure or the tyres will be under-
inflated.

• Be sure to reinstall the tyre

inflation valve caps. Without
the valve cap, dirt or moisture
could get into the valve core
and cause air leakage. If a
valve cap is missing, install a
new one as soon as possible.

Summary of Contents for i40 2015

















































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands