manualshive.com logo in svg

Hyundai Genesis Cupe 2016, Owner'S Manual

Share
Download
Hyundai Genesis Cupe 2016 Owner'S Manual Download Page 71

3 51

Safety features of your vehicle

(Continued)
• Air bags can only be used

once – have an authorized
HYUNDAI dealer replace the
air bag immediately after
deployment.

• The SRS is designed to

deploy the front air bags only
when an impact is sufficiently
severe. Additionally, the air
bags will only deploy once.
Seat belts must be worn at all
times.

• Front air bags are not intend-

ed to deploy in side-impact,
rear-impact or rollover crash-
es. In addition, front air bags
will not deploy in frontal
crashes below the deploy-
ment threshold.

(Continued)

OBK039044

OBK032045L

OBK039050

Rear impact

Side impact

Rollover

(Continued)
• Even though your vehicle is

equipped with the occupant
classification system, do not
install a child restraint system
in the front passenger seat
position. A child restraint sys-
tem must never be placed in
the front seat. The infant or
child could be severely injured
or killed by an air bag deploy-
ment in case of an accident.

• Children age 12 and under

must always be properly
restrained in the rear seat.
Never allow children to ride in
the front passenger seat. If a
child over 12 must be seated
in the front seat, he or she
must be properly belted and
the seat should be moved as
far back as possible.

(Continued)

Summary of Contents for Genesis Cupe 2016




























































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands