Hyundai Genesis Cupe 2016 Owner'S Manual Download Page 10

Page: 10 / 475

1 3

Introduction

Symbols used in illustrations

Safety symbol

The symbol means to "Avoid"
or "Do not do something".

Arrows

Indicates the location.

Indicates the action (pressing,
turning, etc.) or outcome of an
operation.

Your new vehicle is designed to use
only unleaded fuel having a pump
octane number ((R+M)/2) of 87 or
higher. (Do not use methanol blend-
ed fuels.)

Your new vehicle is designed to
obtain maximum performance with
UNLEADED FUEL, as well as mini-
mize exhaust emissions and spark
plug fouling.

CAUTION

Never add any fuel system
cleaning agents to the fuel tank
other than what has been speci-
fied. (Consult an authorized
HYUNDAI dealer for details.)

WARNING

• Do not "top off" after the noz-

zle automatically shuts off
when refueling.

• Tighten the cap until it clicks

once, otherwise the Malfunction
Indicator Light “

” will illumi-

nate.

• Always check that the fuel cap

is installed securely to pre-
vent fuel spillage in the event
of an accident.

FUEL REQUIREMENTS

Summary of Contents for Genesis Cupe 2016




























































































































































































































































































































































































































































































Search results

Summary of Contents for Genesis Cupe 2016

Reviews:

Brands by name

Popular brands

Hyundai Genesis Cupe 2016, Owner'S Manual

Search results

Summary of Contents for Genesis Cupe 2016

Reviews:

Brands by name

Popular brands