Hyundai Genesis Cupe 2016 Owner'S Manual Download Page 258

Page: 258 / 475

4 175

Features of your vehicle

Using My Music Mode

Playing/Pausing My Music Files

While playing, press the

TUNE

knob to pause and press again to
play.

✽

NOTICE

If there are no files saved within My
Music, the

button will be

disabled.

Changing Files

Press the

keys to select

the previous or next file.

✽

NOTICE

• Pressing the

key after

the file has been playing for 2 sec-
onds will start the current file
from the beginning.

• Pressing the

key before

the file has been playing for 1 sec-
ond will start the previous file.

Selecting from the List

Turn the

TUNE knob to search

and select desired files.

Once you find the desired file, press
the

TUNE knob to start playing.

Rewinding / Fast-forwarding Files

While playing, press and hold the

keys to rewind or fast-for-

ward the current file.

Scan

Press the

key to play the first

10 seconds of each file.

SCAN

SEEK

TRACK

SEEK

TRACK

SEEK

TRACK

SEEK

TRACK

My Music

Summary of Contents for Genesis Cupe 2016




























































































































































































































































































































































































































































































Search results

Summary of Contents for Genesis Cupe 2016

Reviews:

Brands by name

Popular brands

Hyundai Genesis Cupe 2016, Owner'S Manual

Search results

Summary of Contents for Genesis Cupe 2016

Reviews:

Brands by name

Popular brands