manualshive.com logo in svg

Hyundai Genesis Cupe 2016, Owner'S Manual

Share
Download
Hyundai Genesis Cupe 2016 Owner'S Manual Download Page 117

Features of your vehicle

34

4

Tilt and telescope steering 

Tilt and telescope steering allows
you to adjust the steering wheel posi-
tion before you drive. You can also
raise or pull it to give your legs more
room when you exit and enter the
vehicle.

The steering wheel should be posi-
tioned so that it is comfortable for
you to drive, while permitting you to
see the instrument panel warning
lights and gauges.

To change the steering wheel angle,
pull down the lock release lever (1),
adjust the steering wheel to the
desired angle (2) and height (3), then
pull up the lock-release lever to lock
the steering wheel in place. Be sure to
adjust the steering wheel to the
desired position before driving.

Horn

To sound the horn, press the horn
symbol on your steering wheel.
Check the horn regularly to be sure it
operates properly.

✽

✽

NOTICE

To sound the horn, press the area
indicated by the horn symbol on
your steering wheel (see illustra-
tion). The horn will operate only
when this area is pressed.

CAUTION

Do not strike the horn severely
to operate it, or hit it with your
fist. Do not press on the horn
with a sharp-pointed object.

OBK049021

OBK042020

WARNING 

• Never adjust the angle of the

steering wheel while driving.
You may lose steering control
and cause severe personal
injury, death or accidents.

• After adjusting,

push the

steering wheel both up and
down to be certain it is locked
in position.

Summary of Contents for Genesis Cupe 2016




























































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands