Hyundai Genesis Cupe 2016 Owner'S Manual Download Page 251

Page: 251 / 475

Features of your vehicle

168

Searching Folders

Select the folder by using the

keys and press

the

TUNE knob to select.

The first file within the selected fold-
er will begin playing.

USB Mode Menu

If you press the

key, you will

have access to the Repeat, Shuffle,
List, Info and Copy features.

Repeat

Press the

key

elect

Each time the button is pressed, the
feature changes in order of Repeat

➟

Repeat Folder

➟

Off.

• Repeat : Repeats the current file.
• Folder Repeat : Repeats all files

within the current folder.

Shuffle

Press the

key

elect

Each time the button is pressed, the
feature changes in order of Shuffle
Folder

➟

Shuffle All

➟

Off.

• Folder Shuffle : Plays the files in

the current folder in random order.

• Shuffle All : Plays all files in ran-

dom order.

✽

NOTICE

The

keys are shortcut

keys to set the Repeat and Shuffle
features.

RDM

RPT

Shuffle

Repeat

FOLDER

CAT

FOLDER

Summary of Contents for Genesis Cupe 2016




























































































































































































































































































































































































































































































Search results

Summary of Contents for Genesis Cupe 2016

Reviews:

Brands by name

Popular brands

Hyundai Genesis Cupe 2016, Owner'S Manual

Search results

Summary of Contents for Genesis Cupe 2016

Reviews:

Brands by name

Popular brands