manualshive.com logo in svg

Hyundai Genesis Cupe 2016, Owner'S Manual

Share
Download
Hyundai Genesis Cupe 2016 Owner'S Manual Download Page 192

4 109

Features of your vehicle

Fan speed control

The ignition switch must be in the ON
position for fan operation. The fan
speed control knob allows you to
control the fan speed of the air flow-
ing from the ventilation system. To
change the fan speed, turn the knob
to the right for higher speed or left for
lower speed.

Air conditioning

Press the A/C button to turn the air
conditioning system on (indicator
light will illuminate).
Press the button again to turn the air
conditioning system off.

OBK042106

OBK042266L

■

Type A, B

■

Type C, D

OBK042105

OBK042264L

■

Type A, B

■

Type C, D

WARNING

• Continued use of the climate

control system operation in
the recirculated air position
may allow humidity to increase
inside the vehicle which may
fog the glass and obscure vis-
ibility.

• Do not sleep in a vehicle with

the air conditioning or heating
system on. It may cause seri-
ous harm or death due to a
drop in the oxygen level
and/or body temperature.

• Continued use of the climate

control system operation in
the recirculated air position
can cause drowsiness or
sleepiness, and loss of vehi-
cle control. Set the air intake
control to the outside (fresh)
air position as much as possi-
ble while driving.

Summary of Contents for Genesis Cupe 2016




























































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands