manualshive.com logo in svg

Hyundai Genesis Cupe 2016, Owner'S Manual

Share
Download
Hyundai Genesis Cupe 2016 Owner'S Manual Download Page 358

6 13

What to do in an emergency

Removing and storing the
spare tire  

Turn the tire hold-down wing bolt
counterclockwise.
Store the tire in the reverse order of
removal.
To prevent the spare tire and tools
from “rattling” while the vehicle is in
motion, store them properly.

❈

If it is hard to loosen the tire hold-down
wing bolt by a hand, you can loosen it
easily using the Jack handle.

1. Put the Jack handle (1) into the

inside of tire hold-down wing bolt.

2. Turn the tire hold-down wing bolt

counterclockwise by the Jack han-
dle to utilize the principles of the
lever and fulcrum.

Changing tires 

1. Park on a level surface and apply

the parking brake firmly.

2. Shift the shift lever into R(Reverse)

with manual transmission or P(Park)
with automatic transmission.

3. Activate the hazard warning flasher.

OBK069002

OBK063002

OBK062004L

Summary of Contents for Genesis Cupe 2016




























































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands