manualshive.com logo in svg

Hyundai Genesis Cupe 2016, Owner'S Manual

Share
Download
Hyundai Genesis Cupe 2016 Owner'S Manual Download Page 29

3 9

Safety features of your vehicle

Removal/Reinstall

To remove the headrest:
1. Recline the seatback (2) with the

recline lever or switch (1).

2. Raise headrest as far as it can go.
3. Press the headrest release button

(3) while pulling the headrest up
(4).

To reinstall the headrest :
1. Put the headrest poles (2) into the

holes while pressing the release
button (1).

2. Recline the seatback (4) with the

recline lever or switch (3).

3. Adjust the headrest to the appro-

priate height.

Active headrest (if equipped)

The active headrest is designed to
move forward and upward during a
rear impact. This helps prevent the
driver's and front passenger’s heads
from moving backward and thus
helps minimize neck injuries.

OBK033069

OBK033070

HNF2041-1

WARNING

NEVER allow anyone to ride in a
seat with the headrest removed.

WARNING

Always make sure the headrest
locks into position after rein-
stalling and adjusting it properly.

Summary of Contents for Genesis Cupe 2016




























































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands