manualshive.com logo in svg

Hyundai Genesis Cupe 2016, Owner'S Manual

Share
Download
Hyundai Genesis Cupe 2016 Owner'S Manual Download Page 30

Safety features of your vehicle

10

3

Lumbar support 
(for driver’s seat, if equipped)

The lumbar support can be adjusted
by pressing the lumbar support
switch on the side of the drivers seat.
Press the front portion of the switch
to increase support, or the rear por-
tion of the switch, to decrease sup-
port.

Seat warmer (if equipped)

The seat warmers are provided to
warm the front seats during cold
weather. While the engine is running,
push either of the switches to warm
the driver's seat or the front passen-
ger's seat.
During mild weather or under condi-
tions where the operation of the seat
warmer is not needed, keep the
switches in the  OFF position.
• Each time you press the button,

the temperature setting of the seat
will change as follows 

• The seat warmer defaults to the

OFF position whenever the ignition
switch is turned on.

✽

✽

NOTICE

With the seat warmer switch in the
ON position, the heating system in
the seat turns off or on automatical-
ly depending on the seat tempera-
ture.

OBK034009

OFF   

→   

HIGH(

)   

→   

LOW(

)

→

OBK032063

Summary of Contents for Genesis Cupe 2016




























































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands