manualshive.com logo in svg

Hyundai Genesis Cupe 2016, Owner'S Manual

Share
Download
Hyundai Genesis Cupe 2016 Owner'S Manual Download Page 187

Features of your vehicle

104

4

Automatic heating and air con-
ditioning

1. Press the AUTO button.
The modes, fan speeds, air intake
and air-conditioning will be controlled
automatically by temperature setting.

2. Set the temperature control knob

to the desired position.

If the temperature is set to the
lowest setting (LO), the air condi-
tioning system will operate contin-
uously.

✽

✽

NOTICE

• To turn the automatic operation

off, select any button or switch of
the following:
- Mode selection button
- Air conditioning button
- Front windshield defroster but-

ton (Press the button one more
time to deselect the front wind-
shield defroster function. The
'AUTO' sign will illuminate on
the information display once
again.)

- Air intake control button
- Fan speed control switch
The selected function will be con-
trolled manually while other func-
tions operate automatically.

• For your convenience and to

improve the effectiveness of the
climate control, use the AUTO
button and set the temperature to
73°F (23°C).

OBK042061

OBK042265L

■

Type A, B

■

Type C, D

OBK042067

OBK042263L

■

Type A, B

■

Type C, D

Summary of Contents for Genesis Cupe 2016




























































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands