manualshive.com logo in svg

Hyundai Genesis 2016, Owner'S Manual

Share
Download
Hyundai Genesis 2016 Owner'S Manual Download Page 85

2-59

Saf

ety system of y

our v

ehicle

2

Riding in an improper position or placing weight on the front passenger's seat when it is unoccupied by a
passenger adversely affects the OCS. To reduce the risk of serious injury or death:

WARNING  

OVQ036013NB

OLMB033100

OLMB033101

OLMB033103

OLMB033102

OLMB033104

•

NEVER put a heavy load or
an active electronic device
in the front seat or seat-
back pocket, or hang any
items on the front passen-
ger seat.

•

NEVER place your feet on
the front passenger seat-
back.

•

NEVER sit with your hips
shifted towards the front
of the seat.

•

NEVER ride with the seat-
back reclined when the
vehicle is moving.

•

NEVER place your feet or
legs on the dashboard.

•

NEVER lean on the door or
center console or sit on
one side of the front pas-
senger seat.

Summary of Contents for Genesis 2016
























































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands