manualshive.com logo in svg

Hyundai Genesis 2016, Owner'S Manual

Share
Download
Hyundai Genesis 2016 Owner'S Manual Download Page 469

7-85

7

Maintenance

6.Install the socket into the assembly

by aligning the tabs on the socket
with the slots in the assembly.
Push the socket into the assembly
and turn the socket clockwise.

7.Reinstall the trunk lid cover by

pushing in the screw.

Type B

If the LED lamp does not operate,
have the vehicle checked by an
authorized HYUNDAI dealer.

Stop and tail lamp

If the lamp does not operate, have
the vehicle checked by an authorized
HYUNDAI dealer.

High mounted stop lamp

If the LED lamp does not operate,
have the vehicle checked by an
authorized HYUNDAI dealer.

ODH073042

Summary of Contents for Genesis 2016
























































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands