manualshive.com logo in svg

Hyundai Genesis 2016, Owner'S Manual

Share
Download
Hyundai Genesis 2016 Owner'S Manual Download Page 205

3-111

Con

v

enient f

eatur

es of y

our v

ehicle

3

Parking lamp position (

)

The parking lamp, license plate lamp
and instrument panel lamp are turned
ON.

Headlamp position (

)

The headlamp, parking lamp, license
plate lamp and instrument panel lamp
are turned ON.

✽

✽

NOTICE

The Engine Start/Stop button must
be in the ON position to turn on the
headlamp.

High beam operation

To turn on the high beam headlamp,
push the lever away from you. The
lever will return to its original position.
The high beam indicator will light
when the headlamp high beams are
switched on.
To turn off the high beam headlamp,
pull the lever towards you. The low
beams will turn on.

ODH044172N

ODH044173N

ODH044175N

Do not use high beam when there
are other vehicles approaching
you. Using high beam could
obstruct the other driver's vision.

WARNING  

Summary of Contents for Genesis 2016
























































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands