manualshive.com logo in svg

Hyundai Genesis 2016, Owner'S Manual

Share
Download
Hyundai Genesis 2016 Owner'S Manual Download Page 189

3-95

Con

v

enient f

eatur

es of y

our v

ehicle

3

Warning lights

✽

✽

NOTICE

Make sure that all warning lights
are OFF after starting the engine. If
any light is still ON, this indicates a
situation that needs attention.

Supplemental Restraint
System Warning Light

This warning light illuminates:

• Once you set the Engine

Start/Stop button to the ON posi-
tion.
- It illuminates for approximately 6

seconds and then goes off.

• When there is a malfunction with

the SRS.
In this case, have your vehicle
inspected by an authorized
HYUNDAI dealer.

Seat Belt Warning Light

This warning light informs the driver
that the seat belt is not fastened.

For more details, refer to the "Seat
Belts" in chapter 2.

W

WA

AR

RN

NIIN

NG

G  A

AN

ND

D  IIN

ND

DIIC

CA

AT

TO

OR

R  L

LIIG

GH

HT

TS

S

Summary of Contents for Genesis 2016
























































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands