Hyundai Genesis 2016 Owner'S Manual Download Page 175

Page: 175 / 503

3-81

Con

enient f

eatur

es of y

our v

ehicle

Press brake pedal to start engine

• This warning message illuminates

if the Engine Start/Stop button
changes to the ACC position twice
by pressing the button repeatedly
without depressing the brake pedal.

• It means that you should depress

the brake pedal to start the engine.

Press START button with smart
key

• This warning message illuminates

if you press the Engine Start/Stop
button while the warning message
“Key not detected” is illuminating.

• At this time, the immobilizer indica-

tor light blinks.

Low Key Battery

• This warning message illuminates

if the battery of the smart key is
discharged when the Engine
Start/Stop button changes to the
OFF position.

ODH043208L

ODH043204L

ODH043206L

Summary of Contents for Genesis 2016
























































































































































































































































































































































































































































































































Search results

Summary of Contents for Genesis 2016

Reviews:

Brands by name

Popular brands

Hyundai Genesis 2016, Owner'S Manual

Search results

Summary of Contents for Genesis 2016

Reviews:

Brands by name

Popular brands