manualshive.com logo in svg

Hyundai Genesis 2016, Owner'S Manual

Share
Download
Hyundai Genesis 2016 Owner'S Manual Download Page 204

3-110

Convenient features of your vehicle

Exterior lights

Lighting control

To operate the lights, turn the knob at
the end of the control lever to one of
the following positions:
(1) DRL OFF position
(2) AUTO light position
(3) Parking lamp position
(4) Headlamp position

AUTO light position

The parking lamp and headlamp will
be turned ON or OFF automatically
depending on the amount of light
outside the vehicle.

Even with the AUTO light feature in
operation, it is recommended to
manually turn ON the lamps when
driving at night or in a fog, or when
you enter dark areas, such as tun-
nels and parking facilities.

L

LIIG

GH

HT

T

ODH044073N

•

Do not cover or spill anything
on the sensor (1) located on
the instrument panel.

•

Do not clean the sensor using
a window cleaner, the cleanser
may leave a light film which
could interfere with sensor
operation.

•

If your vehicle has window tint
or other types of metallic
coating on the front wind-
shield, the AUTO light system
may not work properly.

CAUTION

ODH044171N

Summary of Contents for Genesis 2016
























































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands