manualshive.com logo in svg

Hyundai Genesis 2016, Owner'S Manual

Share
Download
Hyundai Genesis 2016 Owner'S Manual Download Page 170

3-76

Convenient features of your vehicle

Lights

Items

Explanation

One Touch Turn Signal

• Off: The one touch turn signal function will be deactivated.
• 3, 5, 7 Flashing : The lane change signals will blink 3, 5, or 7 times when the turn signal lever is

moved slightly.

For more details, refer to "Light" in this chapter.

Ambient Light

• Off : The ambient light of interior will turn off.
• Auto : The ambient light of interior will turn automatically on or off.
• On : The ambient light of interior will turn on.

Head Lamp Delay

• On: The head lamp delay function will be activated.
• Off: The headlamp delay function will be deactivated.

For more details, refer to "Light" in this chapter.

Welcome Light

• On: The welcome light function will be activated.
• Off: The welcome light function will be deactivated.

For more details, refer to "Welcome System" in this chapter.

Summary of Contents for Genesis 2016
























































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands