manualshive.com logo in svg

Hyundai Genesis 2016, Owner'S Manual

Share
Download
Hyundai Genesis 2016 Owner'S Manual Download Page 332

5-71

Dri
ving y

our v

ehicle

5

LKAS activation

• The LKAS screen will appear on

the LCD display if the system is
activated.

• When both lane lines are detected

and all the conditions to activate
the LKAS are satisfied (green
steering wheel indicator will illumi-
nate and the LKAS indicator light
will change from white to green),
the steering wheel will be con-
trolled.

If the system detects a lane line, the
color changes from gray to white.

The Lane Keeping Assist
System is a system to prevent
the driver from leaving the lane.
However, the driver should not
solely rely on the system but
always check the road condi-
tions when driving.

WARNING  

■

Lane line undetected

■

Lane line detected

ODH053154L

ODH053140L/ODH053141L

Summary of Contents for Genesis 2016
























































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands