manualshive.com logo in svg

Hyundai Genesis 2016, Owner'S Manual

Share
Download
Hyundai Genesis 2016 Owner'S Manual Download Page 198

3-104

Convenient features of your vehicle

This indicator light illuminates for
2 seconds and goes off:

• When the vehicle can not detect

the smart key which is in the vehi-
cle while the Engine Start/Stop
button is ON.
In this case, have your vehicle
inspected by an authorized
HYUNDAI dealer.

This indicator light blinks:

• When the battery of the smart key

is weak.
- At this time, you can not start the

engine. However, you can start the
engine if you press the Engine
Start/Stop button with the smart
key.

(For more details, refer to

"Starting the Engine" in chapter
5)

.

• When there is a malfunction with

the immobilizer system.
In this case, have your vehicle
inspected by an authorized
HYUNDAI dealer.

Turn Signal Indicator
Light

This indicator light blinks:

• When you turn the turn signal light

on.

If any of the following occurs, there
may a malfunction with the turn sig-
nal system. In this case, have your
vehicle inspected by an authorized
HYUNDAI dealer.

- The indicator light does not blink

but illuminates.

- The indicator light blinks more

rapidly.

- The indicator light does not illumi-

nate at all.

Low Beam Indicator
Light (if equipped)

This indicator light illuminates:

• When the headlights are on.

High Beam Indicator
Light

This indicator light illuminates:

• When the headlights are on and in

the high beam position.

• When the turn signal lever is pulled

into the Flash-to-Pass position.

Summary of Contents for Genesis 2016
























































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands