manualshive.com logo in svg

Hyundai Genesis 2016, Owner'S Manual

Share
Download
Hyundai Genesis 2016 Owner'S Manual Download Page 268

5-7

Dri
ving y

our v

ehicle

5

Engine Stop/Start button positions 

Button Position

Action

Notice

OFF

To turn off the engine, press the Engine
Start/Stop button with shift lever in P (Park).
When you press the Engine Start/Stop but-
ton without the shift lever in P (Park), the
Engine Start/Stop button does not turn to the
OFF position, but turns to the ACC position.

ACC

Press the Engine Start/Stop button when the
button is in the OFF position without depress-
ing the brake pedal.
Electrical accessories are usable.

If you leave the Engine Start/Stop button in the
ACC position for more than one hour, the bat-
tery power will turn off automatically to prevent
the battery from discharging.

Summary of Contents for Genesis 2016
























































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands