Hyundai Elite i20 Owner'S Manual Download Page 343

Page: 343 / 400

1.)+

,204/3424-3

Front windshield wiper blade

1. Raise the wiper arm and turn the

wiper blade assembly to expose

the plastic locking clip.

Do not allow the wiper arm to fall

against the windshield, since it may

chip or crack the windshield.

2. Compress the clip and slide the

blade assembly downward.

3. Lift it off the arm.
4. Install the blade assembly in the

reverse order of removal.

Rear window wiper blade

(if equipped)

1.Raise the wiper arm and rotate the

wiper blade assembly (1).

2.Pull out the wiper blade assembly.

NOTICE

OLMB073023

OLMB073020

OLMB073021

OLMB073022

Summary of Contents for Elite i20

















































































































































































































































































































































































































Search results

Summary of Contents for Elite i20

Reviews:

Related manuals for Elite i20

Brands by name

Popular brands

Hyundai Elite i20, Owner'S Manual

Search results

Summary of Contents for Elite i20

Reviews:

Related manuals for Elite i20

Brands by name

Popular brands