Hyundai Elite i20 Owner'S Manual Download Page 34

Page: 34 / 400

4-6

Safety system of your vehicle

Seatback angle

To recline the seatback:
1. Lean forward slightly and lift up on

the seatback recline lever.

2. Carefully lean back on the seat

and adjust the seatback of the
seat to the position you desire.

3. Release the lever and make sure

the seatback is locked in place.
(The lever MUST return to its orig-
inal position for the seatback to
lock.)

Seat cushion height
(for driver’s seat, if equipped)

To change the height of the seat
cushion, move the lever upwards or
downwards.
• To lower the seat cushion, push the

lever down several times.

• To raise the seat cushion, pull the

lever up several times.

OIB034028

OIB034003

■

Type A

■

Type B

OIB034004

Summary of Contents for Elite i20

















































































































































































































































































































































































































Search results

Summary of Contents for Elite i20

Reviews:

Related manuals for Elite i20

Brands by name

Popular brands

Hyundai Elite i20, Owner'S Manual

Search results

Summary of Contents for Elite i20

Reviews:

Related manuals for Elite i20

Brands by name

Popular brands