Hyundai Elite i20 Owner'S Manual Download Page 382

Page: 382 / 400

1.')

,204/3424-3

1. Using a flat-blade screwdriver,

remove the light assembly from

the body of the vehicle by prying

the housing and pulling the

assembly out.

2. Separate the socket and the lens

part by turning the socket counter-

clockwise until the tabs on the

socket align with the slots on the

lens part.

3. Remove the bulb by pulling it

straight out.

4. Insert a new bulb in the socket.
5. Reassemble the socket and the

housing part.

6. Reinstall the light assembly to the

body of the vehicle.

IInterior light bulb replacement

1. Using a flat-blade screwdriver,

gently pry the lens from the interi-

or light housing.

2. Remove the bulb by pulling it

straight out.

3. Install a new bulb in the socket.
4. Align the lens tabs with the interior

light housing notches and snap

the lens into place.

Be careful not to dirty or damage

lens, lens tab, and plastic housings.

NOTICE

■

Room lamp

■

Luggage room lamp

OIB074042

OIB074041

OIB074040

■

Cross

Summary of Contents for Elite i20

















































































































































































































































































































































































































Search results

Summary of Contents for Elite i20

Reviews:

Hyundai Elite i20, Owner'S Manual, Page: 382 / 400

Search results

Summary of Contents for Elite i20

Reviews: