Hyundai Elite i20 Owner'S Manual Download Page 339

Page: 339 / 400

1.+'

,204/3424-3

$#!$##!$$

Draining water from fuel filter

The fuel filter for diesel engine plays

an important role of separating water

from fuel and accumulating the water

in its bottom.
If water accumulates in the fuel filter,

the warning light comes on when the

ignition switch is in the ON position.

If this warning light turned

on, we recommend that

the system be serviced by

an authorized HYUNDAI

dealer.

If the water accumulated in the fuel

filter is not drained at proper times,

damages to the major parts such as

the fuel system can be caused by

water permeation in the fuel filter.

Extracting air from the fuel filter

If you drive until you have no fuel left

or if you replace the fuel filter, be

sure to extract air from the fuel sys-

tem as it makes it difficult to start the

engine.
1. Pump up and down(1) approxi-

mately 50 times until the pump is

hard.

2. Extract air from the fuel filter by

removing the bolt(2) with a cross-

tip screw driver and reinstall the

bolt(2).

3. Pump up and down(1) approxi-

mately 15 times.

4. Extract air from the fuel filter by

removing the bolt(2) with a cross-

tip screw driver and reinstall the

bolt(2).

5. Pump up and down(1) approxi-

mately 5 times.

Information

• Use cloths when you extract air so

that the fuel is not sprayed around.

• Clean the fuel around the fuel filter

or the injection pump before start-
ing the engine to prevent fire.

• Finally, check each part if the fuel is

leaking.

NOTICE

OIB074016

Summary of Contents for Elite i20

















































































































































































































































































































































































































Search results

Summary of Contents for Elite i20

Reviews:

Related manuals for Elite i20

Brands by name

Popular brands

Hyundai Elite i20, Owner'S Manual

Search results

Summary of Contents for Elite i20

Reviews:

Related manuals for Elite i20

Brands by name

Popular brands