Hyundai Elite i20 Owner'S Manual Download Page 390

Page: 390 / 400

1.1%

,204/3424-3

• Caring for the leather seats

- Vacuum the seat periodically to

remove dust and sand on the seat.

It will prevent abrasion or damage

of the leather and maintain its qual-

ity.

- Wipe the natural leather seat cover

often with dry or soft cloth.

- Use of proper leather protective

may prevent abrasion of the cover

and helps maintain the color. Be

sure to read the instructions and

consult a specialist when using

leather coating or protective agent.

- Light colored (beige, cream beige)

leather is easily contaminated and

the stain is noticeable. Clean the

seats frequently.

- Avoid wiping with wet cloth. It may

cause the surface to crack.

• Cleaning the leather seats

- Remove all contaminations instant-

ly. Refer to instructions below for

removal of each contaminant.

- Cosmetic products (sunscreen,

foundation, etc.)

Apply cleansing cream on a cloth

and wipe the contaminate spot.

Wipe off the cream with a wet cloth

and remove water with a dry cloth.

- Beverages (coffee, soft drink, etc.)

Apply a small amount of neutral

detergent and wipe until contami-

nations do not smear.

- Oil

Remove

oil

instantly

with

absorbable cloth and wipe with

stain remover used only for natu-

ral leather.

- Chewing gum

Harden the gum with ice and

remove gradually.

Cleaning the lap/shoulder belt

webbing

Clean the belt webbing with any mild

soap solution recommended for

cleaning upholstery or carpet. Follow

the instructions provided with the

soap. Do not bleach or re-dye the

webbing because this may weaken it.

Cleaning the interior window glass

If the interior glass surfaces of the

vehicle become fogged (that is, cov-

ered with an oily, greasy or waxy

film), they should be cleaned with

glass cleaner. Follow the directions

on the glass cleaner container.

Do not scrape or scratch the inside

of the rear window. This may result

in damage to the rear window

defroster grid.

NOTICE

Summary of Contents for Elite i20

















































































































































































































































































































































































































Search results

Summary of Contents for Elite i20

Reviews:

Related manuals for Elite i20

Brands by name

Popular brands

Hyundai Elite i20, Owner'S Manual

Search results

Summary of Contents for Elite i20

Reviews:

Related manuals for Elite i20

Brands by name

Popular brands