Hyundai Elite i20 Owner'S Manual Download Page 380

Page: 380 / 400

1.'

,204/3424-3

LLow Beam Assist-Static Light

1. Open the hood.
2. Remove the Low Beam Assist-

Static Light bulb cover by turning it

counterclockwise.

3. Disconnect the Low Beam Assist-

Static Light bulb socket-connector.

4. Unsnap the Low Beam Assist-

Static Light bulb retaining wire by

depressing the end and pushing it

upward.

5. Remove the bulb from the Low

Beam Assist-Static Light assem-

bly.

6. Install a new Low Beam Assist-

Static Light bulb and snap the Low

Beam Assist-Static Light bulb

retaining wire into position by

aligning the wire with the groove

on the bulb.

7. Connect the Low Beam Assist-

Static Light bulb socket connector.

8. Install the Low Beam Assist-Static

Light bulb cover by turning it clock-

wise.

Parking (Position) light

1. Remove the socket from the

assembly by pulling it straight out.

2. Remove the bulb from the socket

by pulling it out.

3. Insert a new bulb by inserting it

into the socket.

4. Install the socket in the assembly

by pushing it in.

Front fog light or Daytime running

light (if equipped)

OIB075061

Low Beam Assist-Static Light

OIB077071

OIB077072

OIB077073

■

5 Door
• Type A (without DRL)

■

5 Door
• Type A (with DRL)

■

Cross

Summary of Contents for Elite i20

















































































































































































































































































































































































































Search results

Summary of Contents for Elite i20

Reviews:

Related manuals for Elite i20

Brands by name

Popular brands

Hyundai Elite i20, Owner'S Manual

Search results

Summary of Contents for Elite i20

Reviews:

Related manuals for Elite i20

Brands by name

Popular brands