Hyundai Elite i20 Owner'S Manual Download Page 347

Page: 347 / 400

1.)$

,204/3424-3

IIf you connect unauthorized elec-

tronic devices to the battery, the bat-

tery may be discharged. Never use

unauthorized devices.

Battery capacity label

❈

The actual battery label in the vehicle

may differ from the illustration.

1. CMF60L-BCI : The HYUNDAI

model name of battery

2. 12V : The nominal voltage
3. 60Ah(20HR) : The nominal capac-

ity (in Ampere hours)

4. 92RC : The nominal reserve

capacity (in min.)

5. 550CCA : The cold-test current in

amperes by SAE

6. 440A : The cold-test current in

amperes by EN

Battery recharging

Your vehicle has a maintenance-free,

calcium-based battery.
• If the battery becomes discharged

in a short time (because, for exam-

ple, the headlights or interior lights

were left on while the vehicle was

not in use), recharge it by slow

charging (trickle) for 10 hours.

• If the battery gradually discharges

because of high electric load while

the vehicle is being used, recharge

it at 20-30A for two hours.

NOTICE

OJD072039

■

Example

(Continued)

•

Never attempt to recharge the

battery when the battery cables

are connected.

•

The electrical ignition system

works with high voltage. Never

touch these components with

the engine running or the igni-

tion switched on.

Failure to follow the above warn-

ings can result in serious bodily

injury or death.

Summary of Contents for Elite i20

















































































































































































































































































































































































































Search results

Summary of Contents for Elite i20

Reviews:

Related manuals for Elite i20

Brands by name

Popular brands

Hyundai Elite i20, Owner'S Manual

Search results

Summary of Contents for Elite i20

Reviews:

Related manuals for Elite i20

Brands by name

Popular brands