Hyundai Elite i20 Owner'S Manual Download Page 350

Page: 350 / 400

1.(

,204/3424-3

•• Underinflation also results in

excessive wear, poor handling and

reduced fuel economy. Wheel

deformation also is possible. Keep

your tire pressures at the proper

levels. If a tire frequently needs

refilling, we recommend that the

system be checked by an author-

ized HYUNDAI dealer.

• Overinflation produces a harsh

ride, excessive wear at the center

of the tire tread, and a greater pos-

sibility of damage from road haz-

ards.

• Warm tires normally exceed rec-

ommended cold tire pressures by

28 to 41 kPa (4 to 6 psi). Do not

release air from warm tires to

adjust the pressure or the tires will

be underinflated.

• Be sure to reinstall the tire inflation

valve caps. Without the valve cap,

dirt or moisture could get into the

valve core and cause air leakage.

If a valve cap is missing, install a

new one as soon as possible.

- Tire pressure
Always observe the following:
• Check tire pressure when the tires

are cold. (After vehicle has been

parked for at least three hours or

hasn't been driven more than 1.6

km (one mile) since startup.)

• Check the pressure of your spare

tire each time you check the pres-

sure of other tires.

• Never overload your vehicle. Be

careful not to overload a vehicle

luggage rack if your vehicle is

equipped with one.

• Worn, old tires can cause acci-

dents. If your tread is badly worn,

or if your tires have been dam-

aged, replace them.

NOTICE

Tire Inflation
Overinflation or underinflation can

reduce tire life, adversely affect

vehicle handling, and lead to sud-

den tire failure. This could result in

loss of vehicle control and poten-

tial injury.

WARNING

Summary of Contents for Elite i20

















































































































































































































































































































































































































Search results

Summary of Contents for Elite i20

Reviews:

Related manuals for Elite i20

Brands by name

Popular brands

Hyundai Elite i20, Owner'S Manual

Search results

Summary of Contents for Elite i20

Reviews:

Related manuals for Elite i20

Brands by name

Popular brands