manualshive.com logo in svg

Hyundai Accent 2017, Owner'S Manual

Share
Download
Hyundai Accent 2017 Owner'S Manual Download Page 98

Features of your vehicle

4-24

TILT DOWN 

→

SLIDE OPEN 

→

SLIDE CLOSE

Then, release the control lever.

When this is complete, the sunroof sys-
tem is reset.

❈

For more detailed information, contact
an authorized HYUNDAI dealer.

Electric power steering (EPS)

The power steering uses a motor to
assist you in steering the vehicle. If the
engine is off or if the power steering sys-
tem becomes inoperative, the vehicle
may still be steered, but it will require
increased steering effort.
The motor driven power steering is con-
trolled by a power steering control unit
which senses the steering wheel torque
and vehicle speed to command the
motor.
The steering assist increases as the
vehicle’s speed increases and as the
vehicle’s speed decreases for optimum
steering assist decreases.
Should you notice any change in the
effort required to steer during normal
vehicle operation, have the power steer-
ing checked by an authorized HYUNDAI
dealer.

CAUTION

If the sunroof is not reset when the
vehicle battery is disconnected or
discharged, or related fuse is
blown, the sunroof may operate
improperly.

STEERING WHEEL

CAUTION

• If the Electric Power Steering

System does not operate normal-
ly, the warning light will illuminate
on the instrument cluster. The
steering wheel may become diffi-
cult to control or operate abnor-
mally. Take your vehicle to an
authorized HYUNDAI dealer and
have the vehicle checked as soon
as possible.

• When you operate the steering

wheel in low temperature, abnor-
mal noise could occur. If tempera-
ture rises, the noise will disap-
pear. This is a normal condition.

• When the vehicle is stationary, if

you turn the steering wheel all the
way to the left or right continu-
ously,

the steering wheel

becomes heavier from the end.
This is normal and not system
malfunction. As time passes, the
steering wheel will return to its
normal condition.

nasicoelec.ir

Summary of Contents for Accent 2017





























































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands