Hyundai Accent 2017 Owner'S Manual Download Page 58

Page: 58 / 380

Safety features of your vehicle

3-42

1KMN3663

1KMN3664

1KMN3665

- Never sit with hips shifted

towards the front of the seat.

- Never lean on the door or center

console.

- Never sit on one side of the front

passenger seat.

- Never place feet on the dash-

board.

OVQ036013N

1KMN3662

- Never put a heavy load, an active

electronic device or blanket in
the front passenger seat or seat-
back pocket.

- Never excessively recline the

front passenger seatback.

OVQ036014N

- Never place feet on the front pas-

senger seatback.

(Continued)

nasicoelec.ir

Summary of Contents for Accent 2017





























































































































































































































































































































































































Search results

Summary of Contents for Accent 2017

Reviews:

Brands by name

Popular brands

Hyundai Accent 2017, Owner'S Manual

Search results

Summary of Contents for Accent 2017

Reviews:

Brands by name

Popular brands