Hyundai Accent 2017 Owner'S Manual Download Page 167

Page: 167 / 380

4-93

Features of your vehicle

(Continued)
• When connecting iPod

with the

iPod

Power Cable, insert the con-

nector to the multimedia socket
completely. If not inserted com-
pletely, communications between
iPod

and audio may be interrupt-

ed.

• When adjusting the sound effects of

the iPod

and the audio system, the

sound effects of both devices will
overlap and might reduce or distort
the quality of the sound.

• Deactivate (turn off) the equalizer

function of an iPod

when adjust-

ing the audio system’s volume, and
turn off the equalizer of the audio
system when using the equalizer of
an iPod

• When not using iPod

with car

audio, detach the iPod

cable from

iPod

. Otherwise, iPod

may

remain in accessory mode, and may
not work properly.

✽

NOTICE -

Bluetooth

Wireless Technology

• The

Bluetooth

word mark and

logos are registered trademarks
owned by Bluetooth SIG, lnc. and
any use of such marks is under
license.
A

Bluetooth

enabled call phone is

required to use

Bluetooth

wireless

technology.

•

Bluetooth

Wirelss Technology

phone compatibility can be checked
by visiting www. hyundaiusa.com
and under the SERVICE & PARTS -
BLUETOOTH COMPATIBILITY
menu.

✽

NOTICE - BEFORE USING
THE

Bluetooth

HANDSFREE

What is Bluetooth

•

Bluetooth

refers to a short-distance

wireless networking technology
which uses a 2.4GHz ~ 2.48GHz
frequency to connect various
devices within a certain distance.

• Supported within PCs, external

devices,

Bluetooth

phones, PDAs,

various electronic devices, and
automotive environments,

Bluetooth

allows data to be trans-

mitted at high speeds without hav-
ing to use a connector cable.

•

Bluetooth

Handsfree refers to a

device which allows the user to con-
veniently make phone calls with

Bluetooth

mobile phones through

the audio system.

•

Bluetooth

Handsfree may not be sup-

ported in some mobile phones. To learn
more about mobile device compatibili-
ty, visit www. hyundaiusa.com.

nasicoelec.ir

Summary of Contents for Accent 2017





























































































































































































































































































































































































Search results

Summary of Contents for Accent 2017

Reviews:

Brands by name

Popular brands

Hyundai Accent 2017, Owner'S Manual

Search results

Summary of Contents for Accent 2017

Reviews:

Brands by name

Popular brands