manualshive.com logo in svg

Hyundai Accent 2017, Owner'S Manual

Share
Download
Hyundai Accent 2017 Owner'S Manual Download Page 158

Features of your vehicle

4-84

✽

✽

NOTICE

If you install an after market HID (high
intensity discharge) head lamp, your
vehicle's audio and electronic device
may malfunction.

Antenna

Roof antenna 

Your car uses a roof antenna to receive
both AM and FM broadcast signals. This
antenna is a removable type. To remove
the antenna, turn it counterclockwise. To
install the antenna, turn it clockwise.

WARNING

• The vehicle center of gravity will

be higher when items are loaded
onto the roof. Avoid sudden
starts,

braking,

sharp turns,

abrupt maneuvers or high speeds
that may result in loss of vehicle
control or rollover resulting in an
accident.

• Always drive slowly and turn cor-

ners carefully when carrying
items on the roof. Severe wind
updrafts, caused by passing
vehicles or natural causes, can
cause sudden upward pressure
on items loaded on the roof. This
is especially true when carrying
large, flat items such as wood
panels or mattresses. This could
cause the items to fall off the roof
and cause damage to your vehi-
cle or others around you.

• To prevent damage or loss of

cargo while driving, check fre-
quently before or while driving to
make sure the items on the roof
are securely fastened.

AUDIO SYSTEM

ORB040088

CAUTION

• Before entering a place with a low

height clearance or a car wash,
remove surely the antenna by
rotating it counter-clockwise. If
not, the antenna may be dam-
aged.

• When reinstalling your antenna, it

is important that it is fully tight-
ened and adjusted to the upright
position to ensure proper recep-
tion. But it could be folded or
removed when parking the vehi-
cle or when loading cargo on the
roof rack.

• When cargo is loaded on the roof

rack, do not place the cargo near
the antenna pole to ensure proper
reception.

nasicoelec.ir

Summary of Contents for Accent 2017





























































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands