Features of your vehicle
4-48
If the indicator continues to flash after a
turn, manually return the lever to the OFF
position.
To signal a lane change, move the turn
signal lever slightly and hold it in position
(B). The lever will return to the OFF posi-
tion when released.
If an indicator stays on and does not
flash or if it flashes abnormally, one of the
turn signal bulbs may be burned out and
will require replacement.
One-touch lane change function
To activate an one-touch lane change
function, move the turn signal lever
slightly and then release it. The lane
change signals will blink 3 times.
✽
✽
NOTICE
If an indicator flash is abnormally quick
or slow, a bulb may be burned out or
have a poor electrical connection in the
circuit.
Front fog light (if equipped)
Fog lights are used to help provide
improved visibility when visibility is poor
due to fog, rain or snow etc. The fog lights
will turn on when fog light switch (1) is
turned to ON after the headlights are
turned on.
To turn off the fog lights, turn the switch
to OFF.
CAUTION
When in operation, the fog lights
consume large amounts of vehicle
electrical power. Only use the fog
lights when visibility is poor or
unnecessary battery and generator
drain could occur.
ORB040052D
■
Type A
OAM049046N
■
Type B
nasicoelec.ir
Summary of Contents for Accent 2017
Page 6: ...n a s i c o e l e c i r ...
Page 338: ...7 55 Maintenance ORB075074N Instrument panel Driver s side fuse panel n a s i c o e l e c i r ...
Page 341: ...Maintenance 7 58 ORB075075A Engine compartment main fuse panel n a s i c o e l e c i r ...
Page 372: ...I Index n a s i c o e l e c i r ...