manualshive.com logo in svg

Hyundai Accent 2017, Owner'S Manual

Share
Download
Hyundai Accent 2017 Owner'S Manual Download Page 189

4-115

Features of your vehicle

Pairing through [PHONE] Setup

Press the 

key Select [Phone]

Select [Pair Phone]  Select 

TUNE

knob

1. The following steps are the same as

those described in the section "When
No Devices have been Paired" on the
previous page.

✽

✽

NOTICE 

•

Bluetooth

®

Wireless Technology fea-

tures supported within the vehicle are
as follows. Some features may not be
supported depending on your

Bluetooth

®

Wireless Technology

device.
- Outgoing/Incoming Handsfree calls
- Operations during a call (Switch to

Private, Switch to call waiting, MIC
on/off)

- Downloading Call History
- Downloading Mobile Contacts
-

Bluetooth

®

Wireless Technology

device auto connection

- Bluetooth Audio Streaming

• Up to five 

Bluetooth

®

Wireless

Technology devices can be paired to
the Car Handsfree system.

• Only one 

Bluetooth

®

Wireless

Technology device can be connected at
a time.

• Other devices cannot be paired while

a 

Bluetooth

®

Wireless Technology

device is connected.

• Only 

Bluetooth

®

Wireless Technology

Handsfree and Bluetooth audio relat-
ed features are supported.

(Continued)

(Continued)

Bluetooth related operations are pos-
sible only within devices that support
Handsfree or audio features, such as a

Bluetooth

®

Wireless Technology

mobile phone or a Bluetooth audio
device.

• If a connected 

Bluetooth

®

Wireless

Technology device becomes discon-
nected due to being out of communi-
cation range, turning the device OFF,
or a 

Bluetooth

®

Wireless Technology

communication error, corresponding

Bluetooth

®

Wireless Technology

devices are automatically searched
and reconnected.

• If the system becomes unstable due to

communication errors between the
car Handsfree and the 

Bluetooth

®

Wireless Technology device, reset the
device by turning off and back on
again. Upon resetting 

Bluetooth

®

Wireless Technology device, the sys-
tem will be restored.

• After pairing is complete, a contacts

download request is sent once to the
mobile phone. Some mobile phones
may require confirmation upon
receiving a download request, ensure
your mobile phone accepts the connec-
tion. Refer to your phones user’s man-
ual for additional information regard-
ing phone pairing and connections.

SETUP

CLOCK

nasicoelec.ir

Summary of Contents for Accent 2017





























































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands