manualshive.com logo in svg

Hyundai Accent 2017, Owner'S Manual

Share
Download
Hyundai Accent 2017 Owner'S Manual Download Page 64

Safety features of your vehicle

3-48

(Continued)
• Air bags can only be used once –

have an authorized HYUNDAI
dealer replace the air bag imme-
diately after deployment.

• The SRS is designed to deploy

the front air bags only when an
impact is sufficiently severe.
Additionally, the air bags will only
deploy once. Seat belts must be
worn at all times.

• Front air bags are not intended to

deploy in side-impact,

rear-

impact or rollover crashes. In
addition, front air bags will not
deploy in frontal crashes below
the deployment threshold.

• Even though your vehicle is

equipped with the occupant
detection system, do not install a
child restraint system in the front
passenger seat position. A child
restraint system must never be
placed in the front seat. The infant
or child could be severely injured
or killed by an air bag deployment
in case of an accident.

(Continued)

(Continued)
• Children age 12 and under must

always be properly restrained in
the rear seat. Never allow chil-
dren to ride in the front passen-
ger seat. If a child over 12 must
be seated in the front seat, he or
she must be properly belted and
the seat should be moved as far
back as possible.

• For maximum safety protection in

all types of crashes, all occu-
pants including the driver should
always wear their seat belts
whether or not an air bag is also
provided at their seating position
to minimize the risk of severe
injury or death in the event of a
crash. Do not sit or lean unneces-
sarily close to the air bag while
the vehicle is in motion.

(Continued)

(Continued)
• Sitting improperly or out of posi-

tion can result in serious or fatal
injury in a crash. All occupants
should sit upright with the seat-
back in an upright position, cen-
tered on the seat cushion with
their seat belt on, legs comfort-
ably extended and their feet on
the floor until the vehicle is
parked and the ignition key is
removed.

• The SRS air bag system must

deploy very rapidly to provide
protection in a crash. If an occu-
pant is out of position because of
not wearing a seat belt, the air
bag may forcefully contact the
occupant causing serious or fatal
injuries.

nasicoelec.ir

Summary of Contents for Accent 2017





























































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands